Predicting the mechanical properties of Cu–Al2O3 nanocomposites using machine learning and finite element simulation of indentation experiments

Micromechanics model, finite element (FE) simulation of microindentation and machine learning were deployed to predict the mechanical properties of Cu–Al₂O₃ nanocomposites. The micromechanical model was developed based on the rule of mixture and grain and grain boundary sizes evolution to predict the elastic modulus of the produced nanocomposites. Then, a FE model was developed to simulate the microindentation test. The input for the FE model was the elastic modulus that was computed using the micromechanics model and wide range of yield and tangent stresses values. Finally, the output load-displacement response from the FE model, the elastic modulus, the yield and tangent strengths used for the FE simulations, and the residual indentation depth were used to train the machine learning model (Random vector functional link network) for the prediction of the yield and tangent stresses of the produced nanocomposites. Cu–Al₂O₃ nanocomposites with different Al₂O₃ concentration were manufactured using insitu chemical method to validate the proposed model. After training the model, the microindentation experimental load-displacement curve for Cu–Al₂O₃ nanocomposites was fed to the machine learning model and the mechanical properties were obtained. The obtained mechanical properties were in very good agreement with the experimental ones achieving 0.99 coefficient of determination R2 for the yield strength.     

阿尔泰南缘北塔山组火山岩锆石U-Pb定年及地质意义

新疆阿尔泰南缘北塔山组火山岩较为发育。本文对新疆阿尔泰南缘默色克奥依一带北塔山组火山岩进行地球化学分析和年代学研究。研究表明：U-Pb锆石年龄为（384.3±4.0Ma）Ma，为中泥盆世；该组火山岩属于钾质钙碱性系列，全碱（Na2O+K2O=2.07%-6.49%）和YiO2（0.24%-0.64%）含量较低，K2O含量（1.11%-4.04%）变化较大，稀土元素含量（∑REE）较低。稀土元素显示其轻稀土富集且分馏不明显；δEu值均大于1，为Eu富集型；δCe值均小于1，为Ce亏损型。该组火山岩微量元素P明显富集，K、Rb、Ba等大离子亲石元素（LILE）略富集，亏损Ta、Zr、Hf、Ti等高场强元素（HISF）。结合前人研究，本文认为默色克奥依一带北塔山组火山岩形成于岛弧及与俯冲过程有关的活动大陆边缘造山带环境，为泥盆纪古大洋俯冲消减过程中，俯冲板片脱水产生的流体交代上覆地幔楔部分熔融的产物。     

四川盆地震旦系灯影组丘滩体发育分布及对储层的控制

四川盆地震旦系灯影组储层主要发育于微生物丘滩体中，但不同成因类型丘滩体对储层的影响尚不明确。通过钻井岩心和野外露头观测、岩石薄片分析和物性测试等手段，将丘滩体划分为丘基、丘核、丘翼和丘坪4种微相，并根据微相的组合划分出台缘并进型丘滩体、台缘追补型丘滩体和台内饥饿型丘滩体3种丘滩体类型。台缘并进型丘滩体的生长速率快，与可容空间的增加速率相同步，其微相组合以"丘基+丘核"垂向加积为主，在海平面升降过程中易暴露于大气淡水环境，造成海水胶结作用弱、淡水溶蚀作用强，形成以格架溶蚀孔洞为主的储集空间，储层物性好，储集性能最优。台缘追补型丘滩体的生长速率次之，其早期的生长速率滞后于可容空间增长速率但后期逐渐同步，呈现出"丘基+丘核+丘翼/丘坪"侧向加积的微相组合；由于暴露于大气淡水环境的几率减小，其海水胶结作用强，淡水溶蚀作用减弱，储集性能稍差。台内饥饿型丘滩体的生长速率最慢，严重滞后于可容空间的增长速率，呈"云坪（丘基）+丘核+丘坪"微相组合，难以暴露于大气淡水环境，淡水溶蚀作用最弱，储集性能也最差。台缘带古地貌对丘滩体的生长速率影响较大，可控制丘滩体的沉积样式。陡坡台缘带有利于台缘并进型丘滩体发育，缓坡台缘带主要发育台缘追补型丘滩体，台内高地中发育台内饥饿型丘滩体。胡家坝-阆中-安岳地区一带的震旦系灯影组四段发育于典型的陡坡台缘带，是储层发育的最有利相带。     

基于间隔理论的过采样集成算法

针对传统集成算法不适用于不平衡数据分类的问题，提出基于间隔理论的AdaBoost算法（MOSBoost）。首先通过预训练得到原始样本的间隔；然后依据间隔排序对少类样本进行启发式复制，从而形成新的平衡样本集；最后将平衡样本集输入AdaBoost算法进行训练以得到最终集成分类器。在UCI数据集上进行测试实验，利用F-measure和G-mean两个准则对MOSBoost、AdaBoost、随机过采样AdaBoost（ROSBoost）和随机降采样AdaBoost（RDSBoost）四种算法进行评价。实验结果表明，MOSBoost算法分类性能优于其他三种算法，其中，相对于AdaBoost算法，MOSBoost算法在F-measure和G-mean准则下分别提升了8.4%和6.2%。     

基于边图的线性流重叠社区发现算法

重叠网络的社区发现是复杂网络研究中的重要问题。为了提高网络中重叠社区发现的时间效率，提出一种基于边图的线性流重叠社区发现算法LBSA。算法首先对于边图网络中的边进行随机的依次处理，完成节点的初步社区划分，再将其中重叠小社区合并到相似度最大的其他大社区中得到最终的社区。通过以上步骤，算法能够以接近线性的时间复杂度得到网络的重叠结构。从最终的实验结果来看，与其他算法相比，该算法能够在更短的时间有质量地发现网络中的重叠社区。     

A directional control method for interface flow considering static voltage stability

A directional control method (DCM) for power flows on a set of interface lines between two regions of power system considering static voltage stability margin is developed in this paper. A surface approximation approach is firstly used to obtain the relationship between the interface flow solution and the generation direction of generator (the portion of generation variation in each participating generator to satisfy the desired power increase on the interface and the system loss). Then, an optimization model is built to determine the optimum dispatching scheme of generators. This method not only can control the total power on the interface to satisfy the power demand but also can realize the directional control of power on each interface line based on the needs of operation. The proposed DCM is further extended to determine the optimum dispatching scheme of generators for maximizing the interface flow margin (IFM), which is the active power margin of the key transmission lines between two regions of power system constrained by static voltage stability. A modified continuation power flow (MCPF) is used to show and evaluate the impacts of the DCM on the IFM. The New England 39-bus system and the IEEE 300-bus system have been employed to verify the effectiveness of the DCM.     

基于链接相似度和作弊系数的Spam网页识别算法

Spam网页主要通过链接作弊手段达到提高搜索排名而获利的目的,根据链接作弊的特征,引入链接相似度和作弊系数两个指标来判定网页作弊的可能性。借鉴BadRank算法思想,从Spam网页种子集合通过迭代计算链接相似度和作弊系数,并根据与种子集合的链接指向关系设置权重,将待判定的网页进行度量。最后选取Anti-Trust Rank等算法作对比实验,结果验证了本文算法在准确率和适应性方面优于对比算法。     

低速电机驱动翻板机构的设计与校核

介绍一种低速电机驱动连杆机构来实现接水翻板的运行,连杆机构设计为反平行四边形机构,由一台低速电机作为动力源、连杆作为执行机构、推动翻板打开与合拢,实现翻板接水工作,从而保证压滤机各工艺的正常。此方案结构简单,成本低廉,运行稳定可靠。     

Improved error performance for generalised spatial modulation with enhanced spectral efficiency

The existing analytical average bit error rate (ABER) expression of conventional generalised spatial modulation (CGSM) does not agree well with the Monte Carlo simulation results in the low signal‐to‐noise ratio (SNR) region. Hence, the first contribution of this paper is to derive a new and easy way to evaluate analytical ABER expression that improves the validation of the simulation results at low SNRs. Secondly, a novel system termed CGSM with enhanced spectral efficiency (CGSM‐ESE) is presented. This system is realised by applying a rotation angle to one of the two active transmit antennas. As a result, the overall spectral efficiency is increased by 1 bit/s/Hz when compared with the equivalent CGSM system. In order to validate the simulation results of CGSM‐ESE, the third contribution is to derive an analytical ABER expression. Finally, to improve the ABER performance of CGSM‐ESE, three link adaptation algorithms are developed. By assuming full knowledge of the channel at the receiver, the proposed algorithms select a subset of channel gain vector (CGV) pairs based on the Euclidean distance between all CGV pairs, CGV splitting, CGV amplitudes, or a combination of these.     

Three-phased clustered topology formation for Aeronautical Ad-Hoc Networks

In-Flight Internet Connectivity (IFC) has become one of the crucial needs of passengers with technological improvements. The Aeronautical Ad-hoc Networks (AANETs) have been proposed by establishing air-to-air (A2A) links between aircraft to satisfy this need. However, the unstructured aircraft topology caused by their ultra-dynamic characteristics reduces the longevity of A2A links in AANET. This shorter longevity decreases the stability of AANET by accelerating the connection establishment/termination procedures between aircraft. Additionally, the shorter link longevity affects the packet transfer delay and the delivery ratio of AANET. To the best of our knowledge, these three challenges are not investigated simultaneously under one topology management model. This paper proposes a three-phased topology formation model for AANETs to increase the stability and packet delivery ratio in AANET with a shorter packet transfer delay. The first phase corresponds to the aircraft clustering formation, and here, we aim to increase the AANET stability by creating spatially correlated clusters. The second phase consists of the A2A link determination for reducing the packet transfer delay. Finally, the cluster head selection increases the packet delivery ratio in AANET. According to our simulations, we see that the stability and packet delivery ratio of AANET topology are roughly improved 35% and 31% with a 28% delay reduction compared to the methods in the literature.